Closet door track – A wooden sliding door is an attractive feature to add to a cabinet project. Instead of using a plastic track or metal door, you can make your own wooden sliding door closet track. The wooden track will make the whole project more cohesive. In addition, it will improve the quality and beauty of the piece in general. A wooden door rail is essentially a board with a slot in the top of the sliding door in.
Measure the length of the opening in the cabinet door using a tape measure. This is the required length for the sliding track closet door. Measure the thickness of the sliding door. The cutter used to cut the groove in the track will have to be 1/8 inch wider than this measurement. Place the 1 by 2 by 96 inch flat screen plate on a work surface. Measure the sample to the length that has been measured for the sliding closet door track. Mark the board with a pencil.
23 Photos Gallery of: Make a Wooden Sliding Closet Door Track
Place the 1 by 2 by 96 inch plate on the table of the miter saw. Slide the plate on the table until the pencil mark is aligned with the outer edge of the saw blade. Tighten the saw trigger and guide it through the plate in a constant motion until the cut is completed. The last for make closet door track, place the cutting plate on the milling table with the 2-inch side resting flat. Insert the router bit into the router chuck, tighten it and lock it in place. Adjust the height of the cutter to cut a 3/8 inch deep slot in the board.